In this post I am explaining the all about Nokia 2600 hardware repair solution for solving charging problems and not charging solutions complaints. To solve, fix and servicing this type of problems of Nokia 2600 charging problems and not charging explained below
Nokia 2600 charging system consists of charging socket (Dc Jack) , charging IC , fuse 2.0 A, coil 42R/100MHz , capacitor 470n and power IC and its feed
Main complaints are:
1. Nokia 2600 Charging Problem
2. Nokia 2600 Not Charging
3. Nokia 2600 Charging Ways
4. Nokia 2600 Charging Solution
5. Nokia 2600 Charger Not Supported
Nokia 2600 charging complaints solutions are:
This problem comes due to the charging socket ,fuse, coil, charging IC and Charging Ways
This problem due to the battery temperature controlling circuit error
Water damage, print break and connection error
This problem due to the battery temperature controlling circuit error ,out put resistor and power IC
The final solution for this is to reheat, rework the main IC component. Be sure to check the line paths of corresponding solder ball bumps of the IC component which holds the earpiece or the ringer loud speaker, after reballing it and in placing it back.
Just be careful and have a good heat temperature and air flow control using you reworking station in handling the main IC module.
Nokia 2600 charging system consists of charging socket (Dc Jack) , charging IC , fuse 2.0 A, coil 42R/100MHz , capacitor 470n and power IC and its feed
Main complaints are:
1. Nokia 2600 Charging Problem
2. Nokia 2600 Not Charging
3. Nokia 2600 Charging Ways
4. Nokia 2600 Charging Solution
5. Nokia 2600 Charger Not Supported
Nokia 2600 charging complaints solutions are:
- Nokia 2600 Charging Problem
This problem comes due to the charging socket ,fuse, coil, charging IC and Charging Ways
 |
| Nokia 2600 Charging Problem |
- Nokia 2600 Not Charging
This problem due to the battery temperature controlling circuit error
- Nokia 2600 Charging Ways
Water damage, print break and connection error
 |
| Nokia 2600 Charging Ways |
- Nokia 2600 Charging Solution
- Nokia 2600 Charger Not Supported
This problem due to the battery temperature controlling circuit error ,out put resistor and power IC
The final solution for this is to reheat, rework the main IC component. Be sure to check the line paths of corresponding solder ball bumps of the IC component which holds the earpiece or the ringer loud speaker, after reballing it and in placing it back.
Just be careful and have a good heat temperature and air flow control using you reworking station in handling the main IC module.
No comments:
Post a Comment